Retsch AS 200 tap 30.025.0001 Manuel d'utilisateur télécharger pdf (Page 14)

08.01.2008 Retsch GmbH 14 Doc.Nr. D 98.025.9999

Connect Safety Device

When installing the AS 200 tap, special attention

must be paid to mounting the protective devices

correctly in order to meet the requirements of the

harmonised EN292-1 standard.

Depending on the safety device selected either the

PS safety plug can be fitted or the local safety de-

vices can be connected with the aid of the safety

socket.

Make sure that if the PS safety plug is being used on

its own the operator is protected from any inadver-

tent reaching into the machine.

Remove the Pa (red) cover and replace

it with the Ps safety plug (green).

Other safety devices can be connected to this socket

by trained personnel.

On delivery the machine is in P1 mode program (see

adjacent picture).

After the connection of an external safety device,

the Start T2 (M) pushbutton can be deactivated by

switching over to program mode P2.

Turn off the machine.

While keeping the two TIME + - buttons

pressed down, switch on the machine.

Press the STOP button to save the program

mode.

The software is now set to the P2 program mode. P2

appears in the display.

Pa (rot)

Ps (grün)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Pas de commentaire

Retsch AS 200 tap 30.025.0001 Manuel d'utilisateur Page 14